Toshe Mai siffar cubic Forging
Cikakkun Bayanan Samfura:
Wurin Asali: Shanxi
Sunan Alamar: DHDZ
Takaddun shaida: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Bayani: Nauyin Nau'i: Tan 3
Haƙuri Mai Ƙirƙira: +/-0.5mm
Maganin Surface: Juyawa
Mafi ƙarancin Oda: yanki 1
Kunshin Sufuri: Akwatin Plywood
Farashi: Ana iya yin ciniki
| Abubuwan kayan aiki | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
| A182 F53 | ≤ 0.030 | ≤ 1.20 | ≤ 0.035 | <0.020 | <0.80 | 24-26 | 6.0-8.0 | 3-5 | <0.50 | 0.24-0.32 |
| F6Mn | ≤ 0.05 | 1.0 | ≤ 0.03 | ≤0.03 | ≤0.60 | 11-14 | 3.5-5.5 | 0.5-1 | / | / |
| 42CrMo4 | 0.43 | 1.0 | <0.030 | <0.040 | <0.35 | 0.8-1.1 | <0.030 | 0.15-0.25 | / | / |
| 35NiCrMoV12-5 | 0.30-0.40 | 0.4-0.7 | ≤ 0.015 | ≤ 0.015 | ≤ 0.35 | 1.0-1.4 | 2.5-3.5 | 0.35-0.65 | / | / |
| 20MnMo | 0.17-0.23 | 1.1-1.4 | ≤0.025 | ≤0.015 | 0.17-0.37 | ≤0.030 | ≤0.030 | 0.20-0.35 | / | / |
| 20MnMoNo | 0.16-0.23 | 1.2-1.5 | ≤0.035 | ≤0.035 | 0.17-0.37 | / | / | 0.45-0.60 | / | 0.20-0.45 |
| Kadarar injina | Dia.(mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Notch | Makamashin tasiri | HBW |
| A182 F53 | / | ≥800 | ≥550 | ≥15 | / | V | / | <310 |
| F6Mn | / | ≥790 | ≥620 | ≥15 | ≥45 | V | / | ≤295 |
| 42CrMo4 | Ф10 | ＞1080 | −930 | ＞25 | ＞45 | V | ≥25J(-60℃) | <217 |
| 35NiCrMoV12-5 | F12.5 | ≥1100 | ≥850 | ≥8.0 | / | V | / | / |
| 20MnMo | Ф10 | ≥605 | ≥475 | ≥25 | / | V | ≥180 | / |
| 20MnMoNo | Ф10 | ≥635 | ≥490 | ≥15 | / | U | ≥47 | 187-229 |
Tsarin Samarwa:
Kula da ingancin kwararar ruwa ta hanyar ƙirƙira: Ƙaramin ƙarfe mai ɗanɗano a cikin ma'ajiyar kayan aiki (gwada abubuwan da ke cikin sinadarai) → Yankewa → Dumama (Gwajin zafin wutar lantarki) → Maganin zafi bayan ƙirƙira (Gwajin zafin wutar lantarki) Fitar da tanda (dubawa mara komai) → Injin → Dubawa (UT, MT, Diamention na gani, tauri) → QT→ Dubawa (UT, kaddarorin injiniya, tauri, girman hatsi) → Kammala aikin → Dubawa (girma) → Shiryawa da Alamar (tambarin ƙarfe, alama) → Jigilar Ajiya
Riba:
Kyakkyawan kayan aikin injiniya,
Juriya mai girma mai daidaito,
Kula da tsarin samarwa sosai,
Na'urorin sarrafawa na zamani da na'urorin dubawa,
Kyakkyawan halayen fasaha,
Samar da girma daban-daban dangane da buƙatun abokin ciniki,
Kula da kariyar kunshin,
Inganci cikakken sabis.
Masana'antu na Aikace-aikace:
Injina, kayan aikin nukiliya, kera injina, kayan aikin haƙar ma'adinai, da sauransu.
