Bar ShaftSolid
Nā kikoʻī huahana:
Kahi i kumu: Shanxi
Kapa inoa: DHDZ
Hōʻoia: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Hōʻike hoʻāʻo: MTC, HT, UT, MPT, Hōʻike ʻĀpana, Hōʻike ʻike, EN10204-3.1, EN10204-3.2
ʻO ka ʻili o ka puke moʻolelo: 2.5-0.63μm
Ka nui o ke kauoha liʻiliʻi: 1 ʻāpana
Puke Kaʻa: Plywood Case
Kumukūʻai: Negotiable
Hana Hana: 100PCS / Mahina
| Nā mea waiwai | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
| 4130 | 0.33 | 0.7 | <0.025 | <0.025 | <0.35 | 0.8-1.0 | <0.5 | 0.15-0.25 | / | / |
| 4140 | 0.43 | 1.0 | <0.030 | <0.040 | <0.35 | 0.8-1.1 | <0.030 | 0.15-0.25 | <0.030 | / |
| A105 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| LF2 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| 35NiCrMoV12-5 | 0.30-0.40 | 0.4-0.7 | ≤ 0.015 | ≤ 0.015 | ≤ 0.35 | 1.0-1.4 | 2.5-3.5 | 0.35-0.65 | / | / |
| ASTMA36 | ≤ 0.26 | 0.6-0.9 | ≤ 0.040 | ≤ 0.050 | ≤ 0.40 | / | / | / | ≥0.20 | / |
| Waiwai mīkini | Dia.(mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Notch | Ka ikehu hopena | HBW |
| 4130 | Ф10 | ＞655 | ＞517 | ＞18 | ＞35 | V | ≥20J(-60 ℃) | 197-23 |
| 4140 | Ф10 | ＞1080 | ＞930 | ＞25 | ＞45 | V | ≥25J(-60 ℃) | <217 |
| A105 | / | ≥485 | ≥250 | ≥22 | ≥30 | V | / | 143-187 |
| LF2 | / | 485-655 | ≥250 | ≥22 | ≥30 | V | ≥27J(-29 ℃) | 143-187 |
| 35NiCrMoV12-5 | Ф12.5 | ≥1100 | ≥850 | ≥8.0 | / | V | / | / |
| ASTMA36 | / | 400-550 | ≥250 | ≥23 | / | V | / | / |
Nā Kaʻina Hana Hana:
Ka hoʻomalu ʻana i ka maikaʻi o ke kahe ʻana o ke kaʻina hana: ʻO nā mea kila i loko o ka hale kūʻai (e hoʻāʻo i ka ʻike kemika) → ʻoki → Hoʻomaʻamaʻa (Hoʻāʻo wela o ka umu) → Hoʻomaʻamaʻa wela ma hope o ka hana ʻana (Hoʻāʻo wela i ka umu) ,MT, Visal diamention, hardness)→ QT→ Inspection(UT, mechanical properties, hardness, grain size)→ Hoʻopau machining→ Inspection (dimension)→ Packing and marking(steel stamp, mark)→ Storage Ship
Pōmaikaʻi:
ʻO nā waiwai mechanical maikaʻi loa,
ʻO ka hoʻomanawanui ʻana o ke ana kiʻekiʻe,
E mālama pono i ke kaʻina hana,
ʻO nā lako hana kiʻekiʻe a me nā mea nānā,
ʻO ke kanaka ʻenehana maikaʻi loa,
E hana i nā ʻano like ʻole e pili ana i nā koi o ka mea kūʻai aku,
E noʻonoʻo i ka pale ʻana i ka pūʻolo,
ʻO ka lawelawe piha maikaʻi.
Nā ʻoihana noi:
ʻO nā mīkini mahiʻai, ʻoihana lāʻau lapaʻau, hana mīkini mea hana, ʻoihana kūkulu hale, etc.
