Woulo Etap Arbr
Detay pwodwi:
Kote ki gen orijin: Shanxi
Non mak: DHDZ
Sètifikasyon: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Rapò tès: MTC, HT, UT, MPT, rapò dimansyon, tès vizyèl, EN10204-3.1, EN10204-3.2
Kantite minimòm lòd: 1 moso
Jounal sifas rugueux: 0.63-0.16μm
Fòm Aparans: Round
Pake transpò: Ka Plywood
Pri: negosyab
Kapasite pwodiksyon: 100PCS / Month
| Eleman materyèl | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
| 4130 | 0.33 | 0.7 | <0.025 | <0.025 | <0.35 | 0.8-1.0 | <0.5 | 0.15-0.25 | / | / |
| A182 F53 | ≤ 0.030 | ≤ 1.20 | ≤ 0.035 | <0.020 | <0.80 | 24-26 | 6.0-8.0 | 3-5 | <0.50 | 0.24-0.32 |
| A105 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| F6Mn | ≤ 0.05 | 1.0 | ≤ 0.03 | ≤0.03 | ≤0.60 | 11-14 | 3.5-5.5 | 0.5-1 | / | / |
| 42CrMo4 | 0.43 | 1.0 | <0.030 | <0.040 | <0.35 | 0.8-1.1 | <0.030 | 0.15-0.25 | / | / |
| 34CrNiMo6 | 0.3-0.38 | 0.5-0.8 | ≤ 0.025 | ≤ 0.035 | ≤ 0.4 | 1.3-1.7 | 1.3-1.7 | 0.15-0.3 | / | / |
| 09G2S (09Г2С) | ≤ 0.12 | 1.3-1.7 | ≤ 0.03 | ≤ 0.035 | 0.5-0.8 | ≤ 0.3 | ≤ 0.3 | / | ≤ 0.3 | ≤ 0.008 |
| ASTMA36 | ≤ 0.26 | 0.6-0.9 | ≤ 0.040 | ≤ 0.050 | ≤ 0.40 | / | / | / | ≥0.20 | / |
| Pwopriyete mekanik | Dyamèt (mm) | TS/Rm (Mpa) | YS/Rp0.2(Mpa) | EL/A5 (%) | RA/Z (%) | Notch | Enèji enpak | HBW |
| 4130 | Ф10 | ＞655 | ＞517 | ＞18 | ＞35 | V | ≥20J(-60℃) | 197-23 |
| A182 F53 | / | ≥800 | ≥550 | ≥15 | / | V | / | <310 |
| A105 | / | ≥485 | ≥250 | ≥22 | ≥30 | V | / | 143-187 |
| F6Mn | / | ≥790 | ≥620 | ≥15 | ≥45 | V | / | ≤295 |
| 42CrMo4 | Ф10 | ＞1080 | ＞930 | ＞25 | ＞45 | V | ≥25J(-60℃) | <217 |
| 34CrNiMo6 | Ф12.5 | ≥785 | / | ≥11 | ≥30 | V | ≥71J | / |
| 09G2S (09Г2С) | Ф25 | 900-1050 | ≥700 | ≥10 | ≥50 | V | / | / |
| ASTMA36 | / | 400-550 | ≥250 | ≥23 | / | V | / | / |
Pwosedi pwodiksyon:
Forge pwosesis koule kontwòl kalite: materyèl bwit asye ingot nan depo (tès kontni an chimik) → Koupe → Chofaj (tès tanperati founo) → Tretman chalè apre Forge (tès tanperati founo) Dechaje fou a (enspeksyon vid) → Machining → Enspeksyon (UT) ,MT, Visal diamention, dite) → QT → Enspeksyon (UT, pwopriyete mekanik, dite, gwosè grenn) → Fini machining → Enspeksyon (dimansyon) → Anbalaj ak Marking (koupon an asye, mak) → Depo chajman
Avantaj:
Ekselan pwopriyete mekanik,
Segondè presizyon tolerans dimansyon,
Kontwole pwosedi pwodiksyon an entèdi,
Ekipman fabrikasyon avanse ak aparèy enspeksyon,
Ekselan pèsonalite teknik,
Pwodui diferan dimansyon ki baze sou kondisyon kliyan an,
Fè atansyon sou pwoteksyon pake a,
Kalite sèvis konplè.
Endistri aplikasyon:
Ekstraksyon lwil oliv ak gaz, jenerasyon pouvwa van, machin métallurgique, machin jeni, endistri konstriksyon bato, veso presyon, fòs nikleyè, elatriye.
