Weld Neck Forged Flanges
Threaded Forged Flanges
Lap Joint Forged Flange
Socket Weld Forged Flange
Slip On Forged Flange
Blind Forged Flange
Long Weld Neck Forged Flange
Orifice Forged Flanges
Spectacle Forged Flanges
Loose Forged Flange
Oval Forged Flange (DIN )
Wind Power Flange
CUSTOM Forged Flange
LH-VOC-XST Spray Tower
Flange common knowledge: yield strength
by admin on 21-12-06
1. Yield strength of flange Is the yield limit of metal material when yield phenomenon occurs, that is, the stress resisting microplastic deformation. For metal materi...
Forging model forging process
by admin on 21-12-01
Forging is to make the metal blank in the upper and lower forging die in the mold chamber forced plastic flow molding, so as to obtain the shape of the forgings consis...
How is the grade of forging classified?
by admin on 21-11-18
How is the grade of forging classified? I think the forgings should be rated as grade 1 or 2 or 3 or 4 according to the requirements of pressure and mechanical propert...
Internal stress in forging during cooling
by admin on 21-11-10
Cooling of forgings refers to cooling from the final forging temperature to room temperature after forging. If the cooling method is not chosen properly, the forgings ...
Residual heat of large forgings
by admin on 21-11-04
The waste heat treatment of large forgings uses its own heat to directly heat the forgings after forging, that is, the waste heat treatment of forgings omits the proce...
Stainless steel flat welding flange how to install normally will not leak
by admin on 21-10-28
Stainless steel flat welded flange side fittings are custom made. The fixture must first reach the leak point. The point is to establish a closed chamber between the s...
Forging and pressing process
by admin on 21-10-18
1. isothermal forging is in the whole process of forming billet temperature to maintain a constant value. Isothermal forging is to make full use of the high plasticity...
What is the difference between forging and forging?
by admin on 21-09-27
So-called forging processing, is a certain pressure of forging machinery for metal block, make its produce plastic deformation, which has a certain mechanical properti...
Maintain steel flange in summer
by admin on 21-09-22
How to prolong the service life of steel flange? Three points storage and seven points maintenance, on the basis of scientific storage, the correct and full maintenanc...
Steps and methods for flange manufacturers to produce forged flanges
by admin on 21-09-17
The steps of flange forging include selecting high quality billet, heating, forming and cooling after forging. The forging process includes free forging, die forging a...
Non-standard flange maintenance
by admin on 21-09-15
First, preheating: 1. For the workpiece with complex shape or sharp cross-section change and large effective thickness, it should be preheated 2. The method of preheat...
Common sense of stainless steel flange device
by admin on 21-09-03
In order that the flange of the device does not leak oil, the requirements and precautions of the device are as follows: The main results are as follows: (1) The flang...
Page 1 / 3
Hit enter to search or ESC to close