English

Mai Fitar da Kan layi 1 1/4 Inci Flange Floor - Ƙirƙirar Sanduna - DHDZ

Fitowar Kan layi 1 1/4 inch Flange Floor - Ƙirƙirar Sanduna - Hoton da aka Fitar da DHDZ
  • Mai Fitar da Kan layi 1 1/4 Inci Flange Floor - Ƙirƙirar Sanduna - DHDZ
  • Mai Fitar da Kan layi 1 1/4 Inci Flange Floor - Ƙirƙirar Sanduna - DHDZ

Takaitaccen Bayani:


Zazzage azaman PDF

Cikakken Bayani

Tags samfurin

Bidiyo mai alaka

Jawabin (2)

Muna da ɗayan ingantattun na'urorin masana'antu, ƙwararrun injiniyoyi da ƙwararrun injiniyoyi da ma'aikata, ingantaccen tsarin kulawa mai kyau da kuma ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun tallafi kafin/bayan tallace-tallace donKarfe Flange Bututu Fittings, Forging Karfe Na Ƙarfe Masu Ingantattun Ƙarfe, Jarrabawar Bar, Muna maraba da abokan ciniki, ƙungiyoyin kasuwanci da ma'aurata daga ko'ina cikin duniya don yin magana da mu da samun haɗin kai don lada na juna.
Mai Fitar da Kan layi 1 1/4 Inci Flange Floor - Ƙirƙirar Sanduna - Cikakken DHDZ:

Bude Die Forgings Manufacturer A China

Karɓi Bars

Karfe-Bars1
Karfe-Bars2

Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 | 42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV12

RUWAN SIFFOFIN BARKANCI
Sandunan zagaye, sandunan murabba'i, sandunan lebur da sandunan Hex. All Metals yana da damar ƙirƙira don samar da sanduna daga nau'ikan gami masu zuwa:
● Bakin karfe
● Karfe Karfe
● Bakin karfe

RUBUTUN KARYA

ALOYAYYA

MAX WIDTH

MAX AUNA

Carbon, Alloy

1500mm

26000 kg

Bakin Karfe

800mm

20000 kgs

RUBUTUN KARYA
Matsakaicin tsayin ƙirƙira sanduna zagaye da sanduna hex shine 5000 mm, tare da matsakaicin nauyin 20000 kgs.
Matsakaicin tsayi da faɗi don sandunan lebur da sandunan murabba'i shine 1500mm, tare da matsakaicin nauyin 26000 kgs.

Ana samar da sandar jabu ko sandar birgima ta hanyar ɗaukar ingot da ƙirƙira ta zuwa girman ta, gabaɗaya, falo biyu masu gaba da juna suna mutuwa. Ƙarfashin ƙirƙira yakan zama da ƙarfi, ƙarfi da ɗorewa fiye da simintin simintin gyare-gyare ko sassa na inji. Kuna iya samun tsarin hatsi da aka yi a ko'ina cikin duk sassan ƙirƙira, ƙara ƙarfin sassa don jure warping da sawa.

Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin inji ko kayan aikin injin.

Harka:
Karfe Grade EN 1.4923 X22CrMoV12-1
Tsarin Martensitic

Abubuwan sinadaran% na karfe X22CrMoV12-1 (1.4923): TS EN 10302-2008

C

Si

Mn

Ni

P

S

Cr

Mo

V

0.18 - 0.24

max 0.5

0.4 - 0.9

0.3 - 0.8

max 0.025

max 0.015

11-12.5

0.8-1.2

0.25 - 0.35

Aikace-aikace
Powerplant, Injin Injiniya, Ƙarfin wutar lantarki.
Abubuwan da aka haɗa don layukan bututu, injin tururi da turbines.

Siffan bayarwa
Wuraren Zagaye, Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙaƙwalwar Ƙaƙwalwa, Ƙarƙashin Ƙarƙashin Ƙarƙashin X22CrMoV12-1
Girman: φ58x536L mm.


qqq


qqq


qqq

Ƙarfafa (Aiki mai zafi) Ƙarfafawa

Ana ɗora kayan aiki a cikin tanderun da kuma zafi. Lokacin da zafin jiki ya kai 1100 ℃, karfe za a ƙirƙira. Yana nufin duk wani tsari na inji wanda ke siffata ƙarfe ta ulilizing ɗaya ko fiye ya mutu, misali buɗaɗɗen ƙirƙira, extrusion, mirgina, da sauransu. Yayin wannan tsari, zafin ƙarfe yana faɗuwa. Lokacin da ya ragu zuwa 850 ℃, karfe zai sake yin zafi. Sa'an nan kuma maimaita aikin zafi a wannan zafin jiki (1100 ℃). Matsakaicin rabon rabon aikin zafi daga ingot zuwa billet shine 3 zuwa 1.

Tsarin Maganin Zafi

Load da kayan aikin gyaran zafin zafin jiki a cikin farar fata. Zafi zuwa zafin jiki na 900 ℃. Rike a zafin jiki na 6 hours 5 minutes. Oil quench da fushi a 640 ℃. Sai Air-sanyi.

Kaddarorin injina na X22CrMoV12-1 ƙirƙira mashaya (1.4923).

Rm - Ƙarfin ɗaure (MPa)
(+QT)		 890
Rp0.20.2% ƙarfin hujja (MPa)
(+QT)		 769
KV - Tasirin makamashi (J)
(+QT)		 -60°
139
A - Min. elongation a karaya (%)
(+QT)		 21
Brinell hardness (HBW): (+A) 298

Duk wani maki, ban da wanda aka ambata a sama, ana iya ƙirƙira shi gwargwadon buƙatun abokin ciniki.

Hotuna dalla-dalla samfurin:

Fitowar Kan Layi 1 1/4 Inci Flange Floor - Ƙirƙirar Sanduna - DHDZ cikakkun hotuna

Fitowar Kan Layi 1 1/4 Inci Flange Floor - Ƙirƙirar Sanduna - DHDZ cikakkun hotuna

Jagoran Samfuri masu alaƙa:
We've one of the most innovative masana'antu na'urorin, gogaggen da ƙwararrun injiniyoyi da ma'aikata, gane kyau ingancin rike tsarin da kuma abokantaka gogaggen samun kudin shiga tawagar pre / bayan-tallace-tallace goyon bayan Online Exporter 1 1/4 Inch Floor Flange - Forged Bars - DHDZ , The samfurin zai wadata ga ko'ina cikin duniya, kamar: Monaco, Lesotho, Macedonia, gina dangantaka mai tsawo, da haɗin gwiwa tare da dangantaka mai tsawo. yawan kamfanoni a cikin wannan kasuwancin a Kenya da ketare. Nan da nan kuma ƙwararrun sabis na bayan-sayar da ƙungiyar masu ba da shawara ta ke bayarwa suna farin cikin masu siyan mu. Cikakkun bayanai da sigogi daga kayan ƙila za a aika muku zuwa gare ku don kowace cikakkiyar yarda. Za a iya isar da samfurori kyauta kuma kamfani ya duba kamfaninmu. Ana maraba da Kenya don yin shawarwari akai-akai. Fatan samun tambayoyin buga ku da gina haɗin gwiwa na dogon lokaci.

    • Da yake magana game da wannan haɗin gwiwa tare da masana'anta na kasar Sin, kawai ina so in ce "da kyau", mun gamsu sosai. Taurari 5 Daga Gabrielle daga Ghana - 2017.06.19 13:51
    Isar da lokaci, tsauraran aiwatar da tanadin kwangilar kayayyaki, ya gamu da yanayi na musamman, amma kuma yana ba da haɗin kai sosai, kamfani amintacce! Taurari 5 By Amelia daga Jersey - 2017.04.28 15:45
    Ku rubuta sakonku anan ku aiko mana

    Rukunin samfuran

    Danna shiga don bincika ko ESC don rufewa