Amintaccen mai ba da kayayyaki na kasar Sin 1inch Haɓaka Fuskar Fuskar bangon waya - Tubalan ƙirƙira - Mai samarwa & Mai ba da kayayyaki DHDZ

Amintaccen mai ba da inch 1 inch Rage Fuska Flange - Tubalan ƙirƙira - DHDZ

Amintaccen mai ba da kayayyaki 1inch Haɓaka Fuskar Flange - Ƙirƙirar Tubalan - Hoton DHDZ

Takaitaccen Bayani:

Cikakken Bayani

Tags samfurin

Bidiyo mai alaka

Jawabin (2)

Don ƙirƙirar ƙarin ƙima ga abokan ciniki shine falsafar kasuwancin mu; haɓaka abokin ciniki shine aikin neman aikin muGas Orifice Fitting Flange, Ƙirƙirar Wn Orifice Flange, Ƙirƙirar Ƙungiyoyin Jirgin Kasa, Muna maraba da abokan ciniki, ƙungiyoyin kasuwanci da abokai daga duk sassan duniya don tuntuɓar mu da neman haɗin kai don fa'idodin juna.

Amintaccen mai ba da kayayyaki 1 inch Rage Fuska Flange - Tubalan ƙirƙira - Cikakken DHDZ:

Bude Die Forgings Manufacturer A China

Toshe Karɓi

Tubalan da aka ƙirƙira suna da inganci fiye da farantin ƙarfe saboda toshe yana samun raguwar ƙirƙira a duk bangarorin huɗu zuwa shida idan aikace-aikacen ya buƙaci. Wannan zai samar da ingantaccen tsarin hatsi wanda zai tabbatar da rashin lahani da ingancin kayan aiki. Matsakaicin ƙirƙira juzu'i na toshe ya dogara da ƙimar abu.

Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 | 42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV

RUWAN KASHE
Manyan latsa ƙirƙira tubalan har zuwa 1500mm x 1500mm sashi tare da m tsawon.
Toshe ƙirƙira haƙuri yawanci -0/+3mm har zuwa +10mm ya dogara da girman.
All Metals yana da damar ƙirƙira don samar da sanduna daga nau'ikan gami masu zuwa:
● Bakin karfe
● Karfe Karfe
● Bakin karfe

HARKAR KARFIN TASHIN TSAKI

Kayan abu

MAX WIDTH

MAX AUNA

Carbon, Alloy Karfe

1500mm

26000 kg

Bakin Karfe

800mm

20000 kgs

Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin inji ko kayan aikin injin.

Saukewa: C1045

Abubuwan sinadaran% na karfe C1045 (UNS G10450)
C	Mn	P	S
0.42-0.50	0.60-0.90	max 0.040	max 0.050

Aikace-aikace
Jikin bawul, na'ura mai aiki da karfin ruwa, kayan aikin jirgin ruwa, tubalan hawa, kayan aikin injin, da ruwan turbine
Siffan bayarwa
Mashigin murabba'i, mashaya murabba'i diyya, shingen ƙirƙira.
C 1045 Ƙirƙirar Tushe
Girman: W 430 x H 430 x L 1250mm

Ƙirƙirar (Aiki mai zafi) Ƙarfafawa, Tsarin Maganin zafi

Ƙirƙira	1093-1205 ℃
Annealing	778-843 ℃ tanderun sanyi
Haushi	399-649 ℃
Daidaitawa	871-898 ℃ iska sanyi
Austenize	815-843 ℃ ruwa quench
Rage damuwa	552-663 ℃

Rm - Ƙarfin ɗaure (MPa) (N+T)	682
Rp0.20.2% ƙarfin hujja (MPa) (N +T)	455
A - Min. elongation a karaya (%) (N +T)	23
Z - Ragewa a ɓangaren giciye akan karaya (%) (N +T)	55
Brinell hardness (HBW): (+A)	195

KARIN BAYANI
NEMAN MAGANA A YAU

KO KIRA: 86-21-52859349

Hotuna dalla-dalla samfurin:

Jagoran Samfuri masu alaƙa:

Samun gamsuwar mai siye shine burin kamfaninmu na har abada. Za mu yi babban yunƙuri don ƙirƙirar sabbin samfura masu inganci, gamsar da abubuwan buƙatunku na keɓancewa kuma samar muku da pre-sayarwa, kan-sayarwa da kuma bayan-sayar da mafita don Amintaccen Supplier 1inch Raised Face Flange - Forged Blocks – DHDZ , Samfurin zai wadata a duk faɗin duniya, kamar: Singapore, Singapore, Serbia, muna maraba da abokan cinikinmu na gida da Thailand. Kamfaninmu koyaushe yana nacewa kan ka'idar "kyakkyawan inganci, farashi mai ma'ana, sabis na aji na farko". Muna shirye don gina dogon lokaci, abokantaka da haɗin kai tare da ku.

Alloy And Karfe Forging Part

Bars

Farashin Carbon Karfe Flange

arha A182F310 Bakin Karfe Flange

Ƙwayoyin Rubuce-rubuce marasa ƙarfi

Vacuum Flange

Ko da yake mu ƙaramin kamfani ne, mu ma ana girmama mu. Ingantacciyar inganci, sabis na gaskiya da kyakkyawan ƙima, muna girmama mu sami damar yin aiki tare da ku!