Igwe akpara akpa
Nkọwa ngwaahịa:
Ebe Mmalite: Shanxi
Aha ika: DHDZ
Asambodo: TUV/PED 2014/68/EU
Akụkọ nnwale: En10204-3.1, MTC, EN10204-3.2
Nkwado nnabata: +/- 0.5mm
Ọnụ ahịa kacha nta: 1 ibe
Ngwungwu njem: Plywood Case/Brandrith
Ahịa: Negotiable
Ike mmepụta: 2000 ton / afọ
| Ihe eji eme ihe | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
| 4130 | 0.33 | 0.7 | <0.025 | <0.025 | <0.35 | 0.8-1.0 | <0.5 | 0.15-0.25 | / | / |
| A182 F53 | ≤ 0.030 | ≤ 1.20 | 0.035 | <0.020 | <0.80 | 24-26 | 6.0-8.0 | 3-5 | <0.50 | 0.24-0.32 |
| F6Mn | ≤ 0.05 | 1.0 | ≤ 0.03 | ≤0.03 | ≤0.60 | 11-14 | 3.5-5.5 | 0.5-1 | / | / |
| C45 | 0.42-0.50 | 0.5-0.8 | 0.035 | 0.035 | 0.17-0.37 | ≤ 0.25 | <0.5 | / | ≤ 0.30 | / |
| 35NiCrMoV12-5 | 0.30-0.40 | 0.4-0.7 | ≤ 0.015 | ≤ 0.015 | ≤ 0.35 | 1.0-1.4 | 2.5-3.5 | 0.35-0.65 | / | / |
| 20MnMoNo | 0.16-0.23 | 1.2-1.5 | ≤0.035 | ≤0.035 | 0.17-0.37 | / | / | 0.45-0.60 | / | 0.20-0.45 |
| Ihe eji arụ ọrụ | Dia.(mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Ọkwa | Mmetụta ike | HBW |
| 4130 | Ф10 | 655 | 517 | 18 | ：35 | V | ≥20J (-60℃) | 197-23 |
| A182 F53 | / | ≥800 | ≥550 | ≥15 | / | V | / | <310 |
| F6Mn | / | ≥790 | ≥620 | ≥15 | ≥45 | V | / | ≤295 |
| C45 | Ф12.5 | ≥540 | ≥240 | ≥16 | / | V | / | / |
| 35NiCrMoV12-5 | Ф12.5 | ≥1100 | ≥850 | ≥8.0 | / | V | / | / |
| 20MnMoNo | Ф10 | ≥635 | ≥490 | ≥15 | / | U | ≥47 | 187-229 |
Usoro mmepụta:
Akpụkpọ anụ nchara nchara nchara n'ime ụlọ nkwakọba ihe (nnwale ọdịnaya kemịkalụ) → Ịcha → Heat (Nnwale okpomọkụ) → Ọgwụgwọ ọkụ mgbe ịghachara (nnwale ọkụ ọkụ) Wepu ọkụ (nyocha oghere) → Machining → Nyocha (UT) ,MT, Visal diamention, hardness)→ QT→ Nyocha (UT, mechanical properties, hardness, grain size) → Mechaa machining→ Nyocha (akụkụ) → mbukota na akara (stampụ ígwè, akara) → Nchekwa Mbupu
Uru:
Njirimara igwe dị mma,
Nkwenye akụkụ dị oke oke,
Jikwaa usoro mmepụta nke ọma,
Ngwá ọrụ nrụpụta dị elu na ngwaọrụ nyocha,
Ọkachamara teknụzụ mara mma,
Mepụta akụkụ dị iche iche dabere na ihe ndị ahịa chọrọ,
Lezienụ anya na nchekwa ngwugwu,
Ogo zuru oke ọrụ.
Ụlọ ọrụ ngwa:
Ụlọ ọrụ na-edozi nri, mmepụta ngwá ọrụ, mmiri na mmiri na-agbapụta, ụlọ ọrụ na-ewu ụgbọ mmiri, wdg.
