Forgiae Cubi Speciales
Singula Producti:
Locus Originis: Shanxi
Nomen Marcae: DHDZ
Certificatio: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Relatio Probationum: MTC, HT, UT, MPT, Relatio Dimensionum, Probatio Visualis, EN10204-3.1, EN10204-3.2
Quantitas Minima Ordinis: 1 pars
Specificatio: TUV/PED 2014/68/EU
Fasciculus Vecturae: Ferrea Structura vel Plywood Capsae
Pretium: Negociabile
Capacitas Productionis: 1000 Tonnae/Anno
| Elementa materialia | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
| 4130 | 0.33 | 0.7 | <0.025 | <0.025 | <0.35 | 0.8-1.0 | <0.5 | 0.15-0.25 | / | / |
| A105 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| LF2 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| C45 | 0.42-0.50 | 0.5-0.8 | ≤ 0.035 | ≤ 0.035 | 0.17-0.37 | ≤ 0.25 | <0.5 | / | ≤ 0.30 | / |
| ASTMA36 | ≤ 0.26 | 0.6-0.9 | ≤ 0.040 | ≤ 0.050 | ≤ 0.40 | / | / | / | ≥0.20 | / |
| 16MnD | 0.13-0.20 | 1.2-1.6 | ≤0.030 | ≤0.030 | 0.17-0.37 | ≤0.30 | ≤0.30 | / | / | / |
| Proprietas mechanica | Diametros (mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Incisura | Energia impactus | HBW |
| 4130 | Ф10 | >655 | >517 | >18 | >35 | V | ≥20J (-60℃) | 197-23 |
| A105 | / | ≥485 | ≥250 | ≥22 | ≥30 | V | / | 143-187 |
| LF2 | / | 485-655 | ≥250 | ≥22 | ≥30 | V | ≥27J (-29℃) | 143-187 |
| C45 | Ф12.5 | ≥540 | ≥240 | ≥16 | / | V | / | / |
| ASTMA36 | / | 400-550 | ≥250 | ≥23 | / | V | / | / |
| 16MnD | Ф10 | 470-630 | ≥345 | ≥21 | / | V | / | / |
Rationes Productionis:
Qualitas fluxus processus cudendi: Lingotum chalybis materiae crudae in horreum (contentum chemicum probare) → Sectio → Calefactio (Temperatura fornacis probatio) → Tractatio caloris post cudendum (Temperatura fornacis probatio) Emissione fornacis (Inspectio vacui) → Machinatio → Inspectio (UT, MT, Diametria visualis, duritia) → QT → Inspectio (UT, proprietates mechanicae, duritia, magnitudo grani) → Machinatio perfecta → Inspectio (dimensio) → Involucrum et notatio (signum chalybis, nota) → Depositio Missio
Commodum:
Proprietates mechanicae excellentes,
Tolerantia dimensionalis altae praecisionis,
Rationem productionis stricte moderare,
Instrumenta fabricationis provecta et instrumenta inspectionis,
Excellens indoles technica,
Dimensiones diversas secundum requisita emptoris producere,
Ad tutelam sarcinae attende,
Servitium plenum qualitatis.
Industriae Applicationis:
Centrales electricae, industria autocinetica, instrumenta medica, fabricatio aeronauticorum, petrochemica, processus partium, suggesta maritima, etc.
